1. ZST-ZKJ-02 Inline full automatic framing machine is suitable for glass side down/silica gel or tape packaging. It is also suitable for assembling aluminum alloy frames by corner code interference connection.
2.application
2.1 Function: This machine is suitable for special equipment for frame assembly in photovoltaic solar module production lines. It operates through automatic operation and PLC automatic control.
2.2 Note: The 90° angle joint of the aluminum alloy frame adopts corner piece interference connection. Enter the glass pane horizontally.
2.3 Panel size：max2500×1400（35～50mm）
min1640×992（35～50mm）
3.Equipment efficiency: Working beat: ≤40 seconds
4.The process flow of assembling solar panels:
4.1. Component glass plates are automatically input into the framing machine online. Automatic positioning of components. Then manually place the aluminum alloy frame on the framing machine.
4.2. The aluminum alloy frame is automatically positioned, the frame is automatically assembled, and the components are automatically output.
4.3. Cycle in sequence.
5. Specification
Item | specification | Item | specification |
Voltage (V/Hz) | 220/50 | work efficiency | 1pcs/(40s) |
Rated power(kw) | 3.5 | Work surface height (mm) | 950±50 |
Air source pressure (MPa) | 0.6MPa | Air consumption (L/min) | 100 |
Overall dimensions (mm) | 3500*2400*950 | Weight(Kg) | 3000 |
The misalignment accuracy of component corners is ≤0.3mm. Long and short sides ±1mm. Diagonal ≤1.5mm.
6. Factory requirement
Air source pressure (MPa): 0.6-0.8MPa
Interface specifications: Φ10
Noise (dbA): <72db
Environmental requirements: Temperature: 10-30℃
Power supply (user provided): 220V AC 50Hz. Rated electrical power of the whole machine: about 3.5KW
Average power consumption of the whole machine: about 3~3.5kW
Air source (provided by user): 0.6Mpa; Output interface: Pipe diameter 1/2"
